凤凰娱乐彩票APP

您好,欢迎来到保定市开拓机电销售有限公司网站!

专注节能空压机建站咨询、销售安装、售后维护一站式服务

销售热线:

0312-3135130
138-3328-1195

建站咨询

销售安装

售后维修

产品列表

PRODUCT LIST

凤凰娱乐彩票APP

您现在的位置:凤凰娱乐彩票APP > 凤凰娱乐彩票APP >

螺杆空压机故障的判断与排除方法

时间:2020-04-23     浏览次数:83次

1、查看空压机滤清器,假如有损坏、缺点或不洁净的空气滤芯,及时替换损坏部件;查看空压机进气管是否有扭结或变形,确保进气管道具有低要求的内圈直径(主张15.9毫米以上)。

1. Check the air compressor filter, if there is any damage, defect or unclean air filter element, replace the damaged parts in time; check whether the air inlet pipe of the air compressor is kinked or deformed, and ensure that the air inlet pipe has the minimum required inner ring diameter (more than 15.9mm recommended).

2、查看回油管是否有过多的弯曲、扭结及障碍。主张小回油管内径为(12毫米)。回油管道必须一向从空压机下降到发动机曲轴箱内。

2. Check the return pipe for excessive bending, kinking and obstructions. The recommended minimum return line inside diameter is (12 mm). The return line must always be lowered from the air compressor into the engine crankcase.

3、查看并测量空压机缸套、活塞环磨损及损坏状况及装配状况,磨损严重的应予替换。

3. Check and measure the wear, damage and assembly of air compressor cylinder liner and piston ring, and replace if the wear is serious.

4、针对空压机的空气冷却部分,要清除在散热片上累积的油污、烟灰或不洁净物。发现损坏的零件要替换;查看损坏的散热片,发现损坏的零件要替换。

4。 For the air cooling part of the air compressor, the accumulated oil, soot or unclean matters on the heat sink shall be removed。 The damaged parts shall be replaced; the damaged fins shall be inspected and the damaged parts shall be replaced。

针对空压机的水冷却部分,要查看适当的冷却管道尺寸(主张管道的小直径为9.5毫米),查看空压机的冷却剂流转状况,在发动机调节速度时分,低允许的流量是每分钟5升。假如冷却剂流量缓慢,查看冷却管道和配件积累的锈、扭结和限制因素。

For the water cooling part of the air compressor, check the proper cooling pipe size (it is recommended that the minimum diameter of the pipe is 9.5mm), check the coolant flow of the air compressor, and the minimum allowable flow is 5 liters per minute when the engine adjusts the speed. If the coolant flow is slow, check the cooling pipes and fittings for accumulated rust, kinks and restrictions.

5、查看水温不能超过93℃。查看储气筒上的气阀,确保它们运转正常。主张车辆装备自动排气阀。并在储气筒前适当地配备使空气枯燥的空气枯燥装置。

5. Check that the water temperature does not exceed 93 ℃. Check the air valves on the air reservoir to ensure they operate normally. It is recommended that the vehicle be equipped with automatic exhaust valve. The air drying device for drying the air shall be properly equipped in front of the air receiver.

凤凰娱乐彩票APP6、车辆在刹车没有使用的状况下,走漏每分钟不能超过6。9千帕压力下降,在使用刹车状况下每分钟20。7千帕。假如走漏过多,查看体系漏气并修补。查看卸荷体系是否工作并修复。

6. When the brake is not used, the leakage shall not exceed 6.9 kPa per minute, and the pressure drop shall not exceed 20.7 kPa per minute when the brake is used. If there is too much leakage, check the system for air leakage and repair it. Check the unloading system for operation and repair.

7、测试发动机曲轴箱压力是否过高,替换或修补曲柄轴箱的通风设备。油尺的松动或部分抬起标明曲轴箱的压力有问题。

7. Test whether the engine crankcase pressure is too high, replace or repair the ventilation equipment of the crankcase. A loose or partially raised dipstick indicates a problem with crankcase pressure.

8、查看发动机光滑压力(空压机进油口处),并与额定压力相比较。

8. Check the engine lubrication pressure (at the air compressor oil inlet) and compare it with the rated pressure.

9、替换合格光滑油。

9. Replace qualified lubricating oil.

保定市开拓机电销售有限公司是一家从事螺杆空压机的批发、零售及售后服务工作的专业性公司,长期供应保定空压机、保定节能空压机、保定螺杆空压机、保定英格索兰空压机、离心式空压机、空压机售后维修,我们为用户在压缩空气系统的效率、可靠性、环保、安全、节能等方面提供全面的解决方案。

上一页:常用空压机能产生的压力范围

下一页:高效永磁同步电机

相关新闻MORE

0312-3135130
138-3328-1195
保定市竞秀区隆兴中路77号

保定市开拓机电销售有限公司
BAODING DEVELOPMENT ELECTROMECHANICAL SALES CO., LTD.

copyright©版权所有 保定市开拓机电销售有限公司 站长统计技术支持:点搜科技 网站地图  sitemap
58彩票网 鑫彩网彩票APP 58彩票app下载 98彩票app下载 58彩票app 58彩票app下载 澳彩网彩票app下载 58彩票网 天天彩票app 永盛彩票注册